10 Gallon Fresh Water Tank concession food truck rv 12v WATER PUMP 10TK-12FJ For Sale

Listing includes: 1 (One) 10 Gallon Fresh / Gray Water Holding Part # 10TK & 1 (One) Flojet 12 volt Water Pump Model #03526-144A & 1 (One) Flojet 40 Gauge Mesh StrainerFeatures:

One piece seamless construction - no seems to burst.

Food Grade Approved linear low density polyethylene.

Stain, Corrosion and Rust Resistant - Creamy White in color so you can see waterline through tank.

Check with your local health department if our tanks will pass BEFORE purchasing, please go to our blog and print off any health inspection sheets you may be retail box as these are purchased in bulk, no install instructions as they are OEM parts.

Non-Pressurized Tank - you will need to vent this tank to use it.

Tank will need to sit on a level surface.

Cutting or modifying the tank in any way voids any/all warranty

Includes 4 fittings built into the tank - ALL fittings are on one side:

One) 1 1/4\" Dia x 2\" Tall Boss Pipe (smooth spout with no threads, use a clamp style fitting)
Three) 1/2\" Dia screw in fittings (threaded female - NPT Standard)

Measurements for Tank: (+/- .25\" on each measurement)

19\" Longest Length (not including fittings) x 9\" x 14\" (rotate the tank to change height or width)
Pump Features & Specifications:

Flojet 12 volt Water Pump Model #03526-144A

12 volt - You can not put this in a house or plug into a wall - 110/115/220 volt will damage the unit.

4.4 Amp Draw @ 10 PSI

2.9 Flow GPM

50 Pressure Switch Max PSI

Yes Running

Soft Noise Absorbing Mounts

Snap–in Port Fittings

Built-in Bypass : Less Pulsation

Reduces need for accumulator tank

Corrosion Resistant Materials

Motor: Permanent Magnet, Ball Bearing Totally Enclosed. CE Models are fully suppressed.

Pump: Three chamber diaphragm design Self-priming up to 9 feet suction lift; Pump able to run dry without damage

Remove shipping plugs from pump ports. Some water from factory testing may spill out.

Connect fittings supplied with the pump to the RV’s plumbing. Use 1/2’ I.D. Flexible hose (preferably braided or reinforced) to reduce vibration through the plumbing system as shown on Fig. 1. Use hose clamps on the slip-on barb hose connectors.

CAUTION: Pump surface will get hot to the touch if operated for extended periods of time under pressurized conditions.

Meets ISO 8846 (Ignition protection)

YOU MUST USE A STRAINER FOR WARRANTY TO BE VALID - These pumps are for fresh water not pond, lake or sea water.

Strainer Features & Specifications:

40 mesh removable screen so the strainer can be cleaned, making for a lifetime of use.

A simple click on the tabs will release the mesh/screen cartridge.

Maximum flow 3.5 GPM

Maximum pressure 15 PSI.

Protects your pump from debris which causes premature failure of your water pump

For use on the vacuum side of the water pump

FAQ\'s & Installation Information:

The only tank sizes we carry are listed in our online store, we do not offer custom tanks (unless bulk ordering 500+) and we can not change the fitting configuration or types.

You will need to purchase the fittings that will go from the tank to your hose/pump. We do not sell fittings.

Using this tank for any purpose other than fresh or gray water storage will void any manufacturer warranty.

Economy Shipping (Mail/FedEx Smart Post) will take from 7 - 14 business days to arrive no matter what the shipping quote says. If you need your item faster please upgrade to a faster shipping service.

Check Your Ship-to Address Your payment method and order detail ship-to addresses need to be the same and correct.

Shipping Rates are for the 48 Continental U.S. ONLY. Alaska, Hawaii, and other U.S. territories must contact us first for quotes. **The shipping calculator may not combine multiple items correctly due to sizes and weights, e.g. water tanks**

Contact Info: Class A Customs 1130 County Road 6 West Elkhart, IN 46514 Phone: [phone removed by ] We answer messages as often as possible however we are not a 24/7 business.

Manufacturer Warranty: For warranty to be valid you must provide the paperwork and receipt of the certified dealer/repair shop which installed the unit.Warranty does not cover install by customer or uncertified technician. Please be prepared to provide this information when contacting us regarding a warranty issue.No warranty, guarantee or liability is stated or implied on any product beyond the manufacturer.Class A Customs is not responsible for any damages caused from the use of this or any product we carry.Misuse of item voids any and all warranties.

Return Policy & Problems: If needing to return an item contact us with-in 14 business days of item being received.After approval you will need to return all packing materials & merchandise in new, unused condition.Buyer pays return shipping and 20% Restock fee (25% For Free Shipping Items) will be charged for ALL orders.Problems or concerns please contact us through the Messages.

Class A Customs Blog & Online For answers to common questions, installation instructions, tips and how-to video.