Japan Radio Company JRC NRD-535 HF Shortwave Radio Receiver AM USB LSB CW RTTY For Sale

You are offerding for a Japan Radio Company NRD-535 Shortwave Radio Receiver. It\'s fitted with a continental 2-pin plug, you will need an adapter for UK use, otherwise in excellent condition & working order, as pictured.The Japan Radio Company NRD-535 affords general coverage reception from 90 to 30000 kHz in AM, USB, LSB, CW, RTTY, FAX and narrow FM modes. A triple conversion superheterodyne circuit is employed to provide superb sensitivity and image rejection. Japan Radio has designed a special high-speed 1 Hz step PLL synthesizer to provide you with 1 Hz tuning resolution never before available. Display resolution is 10 Hz via a gorgeous display. A sophisticated 200 channel non-volatile scanning memory stores frequency, mode, AGC, ATT and IF filter selection. Channels can be scanned at a user-defined rate (.5 to 5 seconds/channel) Sweep reception can be adjusted from .05 to .5 seconds/step. Japan Radio\'s reputation for extreme stability continues with only ± 2 PPM drift (after 1 hour) making the NRD-535 the inevitable choice for the demanding non-voice modes such as Morse code, RTTY and FAX. Four independent filter positions are available. The WIDE position features a 4 kHz (@ -6dB) filter. The intermediate position features a 2 kHz (@ -6dB) filter. The narrow and auxiliary positions are not filled. (An empty AUX position results in a +12 kHz bandwidth) The auxiliary positions can be used to mount optional filters. Any filter may be used with any mode (except FM) This is an exceptional feature that provides listener flexibility. The keypad features both MHz and kHz input. The dual-width noise blanker can be used to reduce or eliminate pulse noise (like auto ignition or the \"woodpecker\")Other front panel controls include: SQUELCH, AF and RF GAIN and TONE. An AGC button permits the selection of AGC FAST, SLOW or OFF. The dimmer button offers four brightness display levels. A built-in 24 hour clock timer is provided. The timer permits unattended listening/recording. The receiver can be programmed to be turned on at a particular time (on a set frequency, mode, bandwidth, etc.) and then turn off at a programmed time. A timer-out terminal connection is provided on the back panel of the set to activate a tape recorder. The NRD-535 contains a built-in RS-232 computer interface. There are antenna inputs for wire or coax fed. The AC input voltage is user selectable.