When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Goedrum DIY No.153
Note :
★Anydimensions given are not measured with specialist equipment and are notguaranteed to be accurate in engineering terms.
★Wewill combine shipping if you purchase multiple items. At the purchase of allyour different items, please click “request an invoice” from us, so we canadjust the invoice and apply a shipping discount for you. If you need anyassistance, please contact us. Thank you!
l This product comesexactly as shown in the main photo, and approximate dimensions are also as the photos.
l This dual trigger can be installed under drumhead and on drum shell to transfer vibrations to most electronic drum sound modules.
l Depends on your drum sound module, will be able to get drumhead, rim, or rimshot sounds.
l It has a long 1/4" stereo jack socket, great for using on acoustic drum shell or thick drum shell.
l Piezo-element Specification:
Type
External drive type element
Resonant Frequency
2.9 ± 0.5 KHz
Resonant Impedance
300Ω max
Capacitance
30000pF ± 30% at 100Hz
Input Voltage
30Vp-p max
Operating Temperature
-20 to +60°C
Storage Temperature
-20 to +70°C
Base Material
Brass
l Application example is in the photos. (Example: wood drum shell, head trigger is under top drumhead and rim trigger is closeto top drumhead):
Will need to drill a 12mm hole on drum shell for installing the 1/4" jack.
The jack with black wire is for drumhead sound, and the red wire is for rim sound.
If you would like to buy the whole DIY kit, please see my listings in Drum Triggers category.
Return policy :
Pleasecontact us first if there is a mistake on your purchase. If a return isnecessary, we can refund for the price paid minus shipping costs. Returneditems must be in the same condition as you received them. Buyer pays forreturn shipping.
