63CC Outboard Motor Boat Engine Heavy Duty 2 Stroke 4HP with Air Cooling System For Sale

63CC Outboard Motor Boat Engine Heavy Duty 2 Stroke 4HP with Air Cooling System Description

The Outboard Motors modle of SPOE2.5 has been designed and is intended for the skippers of small boats (carrying capacity less than 4 people ), powered by outboard motors and operating in near waters.

Starting Procedure: 1. Lower engine to running position and check the following
• Fuel level
• Engine mount secure
• Propeller clear
2. Loosen air-vent screw on fuel tank cap by 2 or 3 turns (if fitted)
3. Firmly connect fuel hose to both fuel tank and engine
4. Squeeze primer bulb until it becomes firm
5. Make sure throttle grip on handle in START position
6. Clip lock plate onto emergency-stop switch and tie lanyard to your wrist
7. Pull out choke if starting cold engine
8. Start motor by pulling starter handle (manual start)
9. Push choke back in
10. Check fuel pump to ensure membrane is not torn out
11. Check carburetor to ensure that draining screw is not opened Mounting An Outboard Motor:
The method of securing an outboard motor to the vessel.
Use of hand-tightened screw thread clamps. These clamp the transom of the vessel between the engine mounting bracket and the screw thread plates. Their tightness should be checked each time the engine is used. A safety rope or chain should also be used to secure the motor to the vessel and prevent the motor from dropping from the boat if the clamps get loose during vessel operation. On larger outboard motors, the mounting bracket is usually bolted through the transom plate. This is a more secure method, but regular checks must be made for looseness. Trim Angle:
By changing the outboard motor’s drive angle, the vessel’s bow can be made to rise or fall. The performance and stability of a vessel depends a great deal on correctly trimming the outboard. The correct trim angle depends on the vessel ’ s handling characteristics, the size of the outboard, the sea and loading conditions. Care must therefore be taken to ensure the outboard is trimmed correctly under different sea and loading conditions. On smaller outboards, the trim angle is adjusted manually by moving an adjusting rod to different holes in the mounting bracket. The bigger outboards usually have a Trim Switch fitted on the remote control level. Technical Data : Engine type: Single cylinder Stroke: 2 stroke Cooling System : air-cooled
Engine model: 1E48F
Displacement : 63cc
Max. Power: 2.3kw/8000rpm
Start system: Recoil start(manual start)
Ignition system: CDI
Mixing ratio(Gasoline:oil) 25:1
Gasoline tank capacity: 1.2L
Idle speed: 3000rpm
Gear ratio: 2.08(27/13)
Propeller diameter: 18cm
Propeller options: 7-1/4*5-A inch
Running speed: 15--18km/h Instructions On Refueling:
The gasoline is highly flammable and explosive:
1.Don’t smoke,when refueling,keep away from fire, flame and ignitions of other sources.
2.Shut off the engine of your outboard engine before refueling.
3.Use unleaded gasoline only. Use 2 stroke engine oil.
4.The mixing ratio of gasoline and oil is 25:1. Mix the gasoline and oil and shake well.
5.Don’t spill the gasoline.Use clean cloth wipe off the spilled gasoline.
6.When start the engine, keep at least 3 meters distance from the refueling point. Notice: 1.For this 2 stroke outboard motor, you need to use gasoline and oil mixed fuel, the gasoline and oil mixing ratio is 25:1. Please use 93# gasoline and 2 stroke engine oil. 2.We don\'t have the MSO of the motor. And we can only provide CE certification, there is no other certification can be provided, thanks for your understanding! Product Highlights Features
•360 degree steering rotation for reverse.
• Start-In-Gear protection/clutch feature prohibits prop rotation while idling
• Lift/Tilt feature for shallow water operation and convenience
• Standard CDI ignition system for easy starting and improved performance
• Vertical mount engine design for increased power, performance and durability
• Superior carbonation system with primer bulb for increased efficiency
• Twist grip throttle handle and engine stop button for improved response
• Superior outboard anti corrosion system and anodes for increased durability
• Durable cast aluminum construction for superior corrosion protection
• Heavy duty lightweight plastic cast propeller is standard equipment Package includes 1 x 2-Stroke 63CC Outboard Motor Payment Shipping Returns Contact Us 1. All payments must be prepaid.

2. We only accept payment which are accepted by . Please kindly check if you can do the payment which are accepted by . Before placing an order,Payment must be received within 7 days after order is made. 1. We are not responsible for undeliverable address. We reserve the right to charge the shipping fee again for returned items due to wrong address.

2. Items are generally shipped out within 3 days after your payment has been cleared.

3.The item will be shipped from our US warehouse to United States, which is more faster than from aboard.
2-7 working days to: USA

4.It may take a bit longer time, due to local dispatches, Customs checking, High Season period, eg. x\'mas or other reasons. Your patience is always appreciated. 1. We offer 30 days money back guarantee return policy.

2. Our warranty does not extended to any products that are physically damaged or that are not under normal operating conditions as a result of misuse or improper installation on the buyer/user\'s part.

3. In all cases, buyers pay shipping fees at their own cost to return products for exchange or refund. We will be responsible for the postage of replacements. Refund will be made upon receipt of the returned item. Dear friend:
Welcome to me my services are available: Monday To Friday: 8:30 to 18:00 (Beijing China time)
1. We are in different time zones, during the working time, we will reply your email within 24 hours. If it\'s non-workdays, please kindly be patient and considerable to give us a little more time.
2. Please with message if we made a deal on . E-mail is often filtered as spam.
3. Please wait for our reply to your email, we will do our best to help you solve the problem. Technical Data :
Engine type: Single cylinder
Stroke: 2 stroke
Cooling System : air-cooled
Engine model: 1E48F
Displacement : 63cc
Max. Power: 2.3kw/8000rpm
Start system: Recoil start(manual start)
Ignition system: CDI
Mixing ratio(Gasoline:oil) 25:1
Gasoline tank capacity: 1.2L
Idle speed: 3000rpm
Gear ratio: 2.08(27/13)
Propeller diameter: 18cm
Propeller options: 7-1/4*5-A inch
Running speed: 15--18km/h